Wholesale Nuclear Fallout Suit - Single/Double Split Protective Fume Hood – Heru

1. Upper and lower body structure, the upper part is the sub-assembly operation unit, and the lower part is the mechanical device unit; 304 stainless steel finish inside and outside, integrated liner, double reach holes with protective cover, bottom cabinet with double doors on the front, two reach holes with a diameter of 160mm under the observation window, the hole cover diameter is 200mm, and has the same protection as the cabinet ability.

2. There are 450 × 350 door openings on the side of the fume hood, with swing doors of the same protection equivalent, and the bottom left side is equipped with a activity meter well, and the well body protection is 50mmpb.Equipped with an electric lifting and feeding system, it is possible to place molybdenum technetium generators, with a lifting range of 150mm, equipped with a special lifting protective lead tank, and a sliding tray is set in the cabinet.

3. Self-contained stainless steel air circulation closed inner chamber unit with all configuration requirements for the radiopharmaceutical dispensing process.
Provide triple protection of personnel, preparations and environment.
ULPA ultra-high efficiency filter (﹥99.999%) / special activated carbon filter for radioactive gas; the ventilation system adopts imported exhaust fan, rated voltage 220V, noise <50db, air volume design ≧1m/s, 70% of the system is recirculated and 30% is discharged outside.

4. Provides standard protective lead equivalents in compliance with the ICQP International Radiation Safety Environmental Standard:Six-sided shielding ≥ 10mmpb.

5. Observation device
Equipped with ZF6 (5.2g/cm) high lead glass window with the same protective capacity as the box; The observation window glass size is 300×300.

6. Affiliate configuration
Reader front panel slot, front safety control panel, providing sterilization/lighting/splash-proof socket; power supply 50HZ / 10A /220V with safety protection.